Friday, July 22, 2011

Summer Sampler Series: Arkansas Traveler Block

Welcome back to the Summer Sampler Series. Are you ready for block #6? It's a very unique block, and one of my favorites in the quilt-along!

This is the Arkansas Traveler block, #3912 in the Encyclopedia Of Pieced Quilt Patterns. It's also known as Cowboy's Star, Travel Star, or "Teddy's Choice." It's from the "Other Stars" category of patterns in the Encyclopedia.


Arkansas Traveler Flag Quilt - featured on Earlene Fowler's website

Not much is known about the history of this block, but it likely dates back to the 1800s, since it shares its name with a popular 19th century folk song. There are several quilt blocks known by the name Arkansas Traveler—the others are variations on spool designs. Arkansas Traveler quilts were sometimes made up of more than one type of Arkansas Traveler block, like the flag quilt above (from writer Earlene Fowler's website).

I'm doing a more modern variation on this block, using 60-degree diamonds instead of the narrower diamonds often used in traditional Arkansas Traveler blocks. Since Faith did such an excellent job of introducing us to paper-piecing with Wednesday's Star block, I thought we'd make this block by combining traditional piecing and paper piecing. Don't worry, it's easier than it sounds!

Arkansas Traveler Block Tutorial

Cutting
For diamonds: 2 5/8" x 9" strips - cut 8 (Stash Trad bee members: Cut these strips to 3" instead.)
For background: 3" x 6" strips - cut 8; 3" x 9" strips - cut 8

Cutting and Piecing the Diamonds

1. Place your ruler on an angle over the end of one of the 2 5/8" x 9" strips, lining up the 60-degree mark with the bottom of the strip, as shown, and cut.

2. Slide your ruler over. With the 60-degree mark still lined up with the bottom of the strip, line up the 2 5/8" mark on your ruler with the angled (cut) end of the strip, and cut again. (Stash Trad members, again cut to 3".)

3. You now have a 60-degree diamond. Continue cutting diamonds, two from each strip, until you have 16.

4. Pair up two diamonds, right sides facing, and so that the edges intersect 1/4" from each point (right where your seam will be). This results in little triangles sticking out on each side called dog ears—see them? Make sure those dog ears are showing, and that they're even on each side.

5. Sew and press seam allowances open. Sew together a second pair and press.

6. Put your pairs together, right sides facing, as shown above. Again, make sure the dog ears are correct.

7. Sew and press seam allowances open. You should now have a diamond unit that looks like this. Repeat the steps above until you have four diamond units.

Paper-Piecing the Diamonds into the Background1. Let me start by saying that if you've never paper-pieced before, and you haven't yet made Faith's Star block, I recommend you do that first. Faith did a great job introducing the skill of paper-piecing, and I don't want to repeat too much of what she explained in her post.

2. Okay, all set? Print out 4 copies of my paper-piecing template for this block, which can be found here. Be sure to set page scaling to "None" or "100 percent" when printing, and after printing, check the 1" scale to make sure it's accurate. Trim the templates.

3. Attach one of your peiced diamond units to the back of the template, lining up the diamond seams you sewed in the previous steps with the "pre-sewn line" marks on the front of the template (as much as you can see them through the paper). I flipped down the edges of the diamond unit to make sure the seams were lined up, but don't stress about it too much. Since those diamond seams don't line up with anything else, it's not crucial that they be exact. I used double-sided tape to attach my diamond units to the back of the paper—I prefer that over pins. You could also use a glue stick.

Tip: If you have a certain color/print that you want in the center, place the diamond unit so the center print is between 4 and 5 (where my blue and green floral print is in the photo below), rather than between 2 and 3. This will give your seams an outward radiating pattern.

4. Hold up your template to a light source to visually check that your diamond unit is placed correctly and that there will be 1/4" seam allowance all the way around. This diamond unit is piece #1. You'll add piece #2, a background piece, next.

5. Place a 3" x 6" background piece along the edge of the diamond that borders section #2. Make sure right sides facing and the edges are approximately lined up, as shown. Now turn over the whole thing and sew on the line, through the paper, as Faith showed on her blog. Remember to lower your stitch count to perforate the paper better—I use 1.4.

6. Press back the piece you just sewed and trim any excess seam allowances. Repeat the steps above to add additional background pieces, in order, according to the numbers on the paper template. You will use the 3" x 6" pieces for the first two background pieces, and the 3" x 9" cuts for the second (longer) two pieces.

7. Once you've sewed on all four background pieces, it should look like this.

8. Turn the whole thing over and trim around the edges of the paper template. DON'T tear the paper off yet!

9. You now have the first of your four star units. Repeat the steps above to create the other three quarter-block units.

10. Arrange two of the star units as shown.

11. Put the units together, right sides facing, with the paper still on.

12. Sew the two units together on the template's outer line, as shown. So you're now sewing through two star units and two paper templates. There will be a lot of seam bulk where the center points meet, but the paper will give that area some structure, which should keep the fabric from bunching up. It will also help you match up the points more accurately, in spite of the bulk. If your machine gets hung up at that corner, you may need to gently push the units/paper through. You could also try adjusting your presser foot to make it less tight (if your machine has that option) or using a walking foot if you're still having problems.

When you're done sewing, here's what it looks like on the other side. Your sewing should come through the other side right on the other template's line (mine isn't perfect, but it's close enough!)

And here's what it looks like when you're done (the paper is still on the back).

13. Repeat with the other two star points. Finger press the seam allowances open. When you're ready to join the two pairs with the final seam of the block, you can take the paper off if you're worried about the paper making too much bulk in your machine, or leave the paper on and piece it the same way you did the previous two seams.

14. Once the entire block has been pieced, remove the paper and press seams open.

And with that, we are now halfway through this quilt-along! Here are all 6 of my blocks together. I can't wait to see your blocks, especially Arkansas Traveler, so please post pictures to the Flickr group.

On Monday, the Summer Sampler Series will be back on Kate's blog to kick off our second half. Have a wonderful weekend, everyone!

25 comments:

Laura Jane said...

Love this block. Its my favourite so far! The black really makes yours pop :-)

Teresa said...

Very pretty! I love the colors that you are using for this quilt!
I really think this seems like a more doable quilt along than the Farmers Wife!
I think I will try this once I am all settled in my new house!

Debbie said...

Wow - half way! It's sure been fun! Looking forward to trying your new block.

Katie B. said...

Awesome block, Lee!

liz said...

Wow, what a great block!

Kati said...

I really love this block. I've wanted to do something with diamonds for my 4x5 block. Maybe I'll give this one a try for that.

Linz said...

This block looks SO fun! I can't wait to get it going!

Meg said...

Looks awesome! Thanks!

Lauren P said...

Beautiful! I love the colors you chose.

Muriƫl said...

That is a great block! Thank you so much!!

LynCC said...

These are all so very cool!

Sorrel said...

Beautiful! A big thank you to all three of you - this is a wonderful QAL, offering so many new blocks and techniques to try.

Jessica said...

This is a great block!!

April (Polkadot Sparrow) said...

I just learned about this block business and I love it! I love this one and all the other ones you've done. Thanks for the history of the block. I'm putting it in my Civil War sampler quilt now. :)

pasqueflower said...

Yikes! Bias edges and lots of points to match! What a challenge. Your block is beautiful, as always, and your workmanship is top notch!

Marg said...

Thank you so much for the tutorial. This is the first time I've seen a paper piecing tutorial that shows how to join two paper pieced sections together. Thank you thank you.
I really wish I was doing this Summer Sampler series but I just have too many other projects right now.

Rachel Hauser said...

I finished mine last night and I LOVE how it came out. Thanks for pushing me to try things that I wouldn't normally try. I'm just a wee bit thrilled so far.

Cindy said...

Love this block! It looks really hard though. I think I changed from no=reply to reply, but if i didn't could you reply to cdahlgren at live dot com? I would like to know if I fixed this problem!

tusen said...

I'm afraid I'm not quilting along with you, but I like this block very much. And it looks beautiful in the fabrics you've chosen.

Shelley said...

I printed my paper-piecing templates with no scaling, but the size was still off. Didn't check before I sewed the whole thing together :( The block is roughly 11.75" square. Oh well, I'll just add some sashing or something. No worries! Great block - I love it!

Kelli said...

My printed copies came out small too, but that's a relief because now I know that I did do the last two blocks right, it was the computer's fault I'm gonna need some sashing!! ;) Lee, this block was great and your instructions made it easy. THANKS!!

cleo said...

ooooh this is PERFECT for a swap im in!! thanks sooooo much for this fantastic tute!!

Cleo
cleo (AT) techgtear.co.za

Anonymous said...

ooops spelt my email address wrong!!
cleo (AT)techgear.co.za

Anonymous said...

pasqueflower:

Press a strip of very light weight non-woven iron-on interfacing where the bias edges will be befor cutting the pieces. You will want the interfacing to civer no more than 3/16" of your 1/4" seam allowance. The interfacing will stabilize the bias edges. Starched fabric will also stretch less than unstarched fabric.

Mr. Briggs said...

Thanks to you and the ladies at FreshLemonQuilts and SwimBikeQuilt for putting this tutorial together. It's been the perfect summer project for me and the fabric I impulsively bought. It's been very easy to follow so far, and I can't wait to finish the last four blocks. I am also looking forward to doing the final layout.

Thank you

Related Posts Plugin for WordPress, Blogger...
 

Disclosures

In addition to my paid sponsors, I sometimes accept free fabric, notions, or tools in exchange for posting about it on this blog or my other social media platforms. But I pledge that this practice will never change one of my product reviews or lead me to use fabric or other items that are not "my style."

I also am an Amazon Affiliate and receive compensation for items ordered via my Amazon links.

Copyright and Permissions FAQ

Can I make a quilt that looks just like one of yours? Of course! You don't need my permission for that. But remember, it's polite (and helpful to others) to credit your source of inspiration.

Can I share one of your photos on my blog or website? Probably! But please contact me for permission first. Use of my photos for commercial purposes is prohibited.

Can I pin your photos to Pinterest? Yes, please do! I love Pinterest!

Can I sell individual items made from your tutorials or patterns? Yes! But please don't open a factory and start churning out hundreds of them. : ) And please do not reproduce or sell the patterns or tutorials themselves. Thank you!